WARNING: These products can expose you to chemicals including lead, cadmium, cobalt, lithium carbonate, silica, crystalline (airborne particles of respirable size), titanium dioxide, which are known to the State of California to cause cancer, birth defects or other reproductive harm (www.P65warnings.ca.gov).
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, England manufacturer, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" recommended firing at 1450 to 1550 degrees F. for approximately 2 to 4 minutes, based on preference. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 120 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opaque, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
