WARNING: These products can expose you to chemicals including lead, cadmium, cobalt, lithium carbonate, silica, crystalline (airborne particles of respirable size), titanium dioxide, which are known to the State of California to cause cancer, birth defects or other reproductive harm (www.P65warnings.ca.gov).
Opalscent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F.
Opalscent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. The enamel is lead bearing
Opalscent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. The enamel is lead bearing
Opalscent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. The enamel is lead bearing
Opalscent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. The enamel is lead bearing
Opalscent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. The enamel is lead bearing
Opalscent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. The enamel is lead bearing
Opalscent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. The enamel is lead bearing
Opalscent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. The enamel is lead bearing
Opalscent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. The enamel is lead bearing
Opalscent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. The enamel is lead bearing
Opalscent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. The enamel is lead bearing
Opalscent, Schauer Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1500 degrees F. for approximately 2 to 4 minutes. The enamel is lead bearing
Opalscent, Schauer Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1500 degrees F. for approximately 2 to 4 minutes. The enamel is lead bearing
Opalscent, Schauer Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1500 degrees F. for approximately 2 to 4 minutes. The enamel is lead bearing
Opalscent, Schauer Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1500 degrees F. for approximately 2 to 4 minutes. The enamel is lead bearing
Opalscent, Schauer Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1500 degrees F. for approximately 2 to 4 minutes. The enamel is lead bearing
Opal, cataloged, Blythe enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1350 to 1355 degrees F. for approximately 2 to 4 minutes. Enamel is 80 mesh and lead bearing.
Opalscent, Nihon Shippo Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. The enamel is lead bearing
Opalscent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opalscent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opalscent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opalscent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opalscent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opalscent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opalscent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opalscent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opalscent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opalscent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opalscent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opalscent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opalscent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
