Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "hard fusing" and should be fired at 1500 to 1575 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
*Best Value White!* Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Qpaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Qpaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Qpaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Qpaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Qpaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Qpaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1400 to 1500 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "hard-fusing" and should be fired at 1425 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1400 to 1500 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Due to the quality this enamel is to be used as counter enamel only.
Qpaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Qpaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, un-cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Qpaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Qpaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Qpaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, un-cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Qpaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Qpaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Qpaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Qpaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Qpaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Qpaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Qpaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Qpaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Qpaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, un-cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Qpaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Qpaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Qpaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Qpaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, un-cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, un-cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Qpaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, un-cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Qpaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "soft fusing" and should be fired at 1450 to 1550 degrees F. for approximately 1 to 3 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Qpaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Qpaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Qpaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, un-cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, un-cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” recommended firing at 1450 to 1550 degrees F. for approximately 2 to 4 minutes based on preference. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, un-cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Qpaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, un-cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Qpaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, un-cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Qpaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Qpaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” recommended firing at 1450 to 1550 degrees F. for approximately 2 to 4 minutes based on preference. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Qpaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Qpaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, un-cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Qpaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Qpaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Qpaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, un-cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, un-cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes.
Opaque, un-cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Opaque, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
