WARNING: These products can expose you to chemicals including lead, cadmium, cobalt, lithium carbonate, silica, crystalline (airborne particles of respirable size), titanium dioxide, which are known to the State of California to cause cancer, birth defects or other reproductive harm (www.P65warnings.ca.gov).
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommended.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommended.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommended.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommended.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommended.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommended.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommended.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommended.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommended.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommended.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommended.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommended.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommend.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommend.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommend.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommend.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommend.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommend.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommend.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommend.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommend.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommend.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommend.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing. This enamel has a matte finish
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommend.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommend.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommend.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommend.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommend.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommend.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommend.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommend.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommend.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommend.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommend.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommend.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommend.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommend.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommend.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommend.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommend.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommend.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommend.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommend.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommended.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommended.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommend.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommended.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommended.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommended.
Transparent, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
The enamel used for making the pictured samples has been "washed." All enamel is sold unwashed. Washing is not required for use, but recommended.
