WARNING: These products can expose you to chemicals including lead, cadmium, cobalt, lithium carbonate, silica, crystalline (airborne particles of respirable size), titanium dioxide, which are known to the State of California to cause cancer, birth defects or other reproductive harm (www.P65warnings.ca.gov).
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "hard fusing" and should be fired at 1500 to 1575 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1550 to 1600 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
Opaque, Milton Bridge Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1490 to 1530 degrees F. for approximately 2 to 4 minutes. All Enamel is new stock and lead bearing.
