WARNING: These products can expose you to chemicals including lead, cadmium, cobalt, lithium carbonate, silica, crystalline (airborne particles of respirable size), titanium dioxide, which are known to the State of California to cause cancer, birth defects or other reproductive harm (www.P65warnings.ca.gov).
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
*Sample has been fired over flux* Keywords: Transparent, Grey, $3.00
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Forsynthia has an amazing glow to it unlike any other color.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing. *This sample has been fired over flux*
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, un-cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing. *This sample has been fired over flux*
Transparent, un-cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
*This sample has been fired over Blythe C-10 Flux*
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, un-cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing. *This sample has been fired over flux*
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, un-cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing. *This sample has been fired over flux*
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, un-cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, un-cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing. *Sample fired over Blythe C-10 Flux*
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" recommended firing at 1450 to 1550 degrees F. for approximately 2 to 4 minutes based on preference All Enamel is pre-1990, 80 mesh and lead bearing. <
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, un-cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing. *This sample has been fired over silver foil*
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Forsynthia has an amazing glow to it unlike any other color. I'm keeping half of this enamel for my private collection.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
*This sample has been fired over Blythe C-10 Flux*
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, un-cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Medium fusing Thompson Enamel for Copper, When used in combination with transparents will lighten the original transparent color. Should be fired at 1450 to 1550 degrees F. All Enamel is pre-1990, and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is “medium fusing” and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
Transparent, un-cataloged, Thompson Enamel for Copper, Silver, Gold, Iron and Steel. This enamel is "medium fusing" and should be fired at 1450 to 1550 degrees F. for approximately 2 to 4 minutes. All Enamel is pre-1990, 80 mesh and lead bearing.
